Elastomeric Foam

Elastomeric Foam

Elastomeric foam is commonly used in HVACs and cooling equipment. As the name implies, it belongs to a group of insulation industries based on closed-cell elastomeric type and suitable structure. Elastomeric foam has high resistance to vapor penetration and is a suitable and dense insulation on the installation. After calculating the thickness of the required insulation, in order to prevent energy loss, you can use elastomeric insulation

Method of Elastomeric foam application

Tubular elastomeric foam or rolled elastomeric foam is produced with high flexibility. The tubes are cut from two heads for sticking. Insulation tubes can be used simultaneously with the installation of the main pipes of the facility or after their installation. These tubes can be glued longitudinally to the joints with Formix adhesive. Rolled elastomeric foam (panel elastomeric foam) can be used to insulate pipes with a diameter of more than 5 inches or HVACs air ducts. If needed, the self-adhesive rolled elastomeric foam can also be used. In order to ensure the system performance, it must be implemented properly; otherwise the system performance will not be optimal

Clean technology: LINKRAN elastomeric foam causes the least amount of pollution in the environment and is the pioneer in this field with its longevity

Usage and advantages of elastomeric foam

LINKRAN elastomeric foam, with its super-flexible and elastic properties, is easy and very simple to install on all levels that are difficult to implement, such as T-shaped and L-shaped surfaces, and saves time and labor.

LINKRAN elastomeric foam is fire resistant and does not allow flames to advance in horizontal and vertical spaces during a fire. With this feature of the structure, the elastomeric foam provides sufficient fire protection during installation on the facility.

LINKRAN elastomeric foam is produced with suitable density and closed-cell structure and prevents moisture and vapor penetration and provides long-term performance with sufficient safety factor.

Heat transfer coefficient is the most important features of insulation. The air trapped in the LINKRAN closed-cells elastomeric foam, reduces the thermal conductivity and significantly reduces heat transfer